Overview
节省空间的基本型
扩展模块连接接口，可寻址24路数字量输入、16路数字量输出和8个模拟量输入和2个模拟量输出
可选择连接 LOGO！TD 文本显示（可连接到所有 LOGO!0BA6 基本型)
LOGO! 的新改进0BA7 型号：
以太网接口，用于与 SIMATIC 控制器、SIMATIC 面板以及 PC 进行通讯
可组网多达 8 个 LOGO! 设备
标准 SD 卡或 SIMATIC 存储卡的使用
注意：
SIPLUS extreme 产品是基于西门子工业标准产品的。此处列出的内容来自相关的标准产品。添加了特定 SIPLUS extreme 信息
Design
LOGO! 0BA6:
继电器输出，最高输出电流 10A(不适于 LOGO!24).
集成了可参数设计背光的显示区(4x12字符)。
集成了操作员控制面板。
内置EEPROM存储器，用于控制程序和设定值
用于防复制和专有技术保护的可选程序模块。
可选电池模块和组合电池/程序模块，2 年后备集成实时时钟。
内置夏令时/冬令时自动调节的实时时钟。
8个数字量输入，4个数字量输出。
对于DC12/24V型号，4个输入作为模拟量输入(0-10V)；也可作为数字量输入。
4个输入可用来高速计数，最高5KHz(只针对于直流型)。
扩展模块连接接口，最多可编址 24 点数字量输入、16 点数字量输出、8 点模拟量输入和 2 点模拟量输出。
用于连接到 LOGO!TD 文字显示屏。
每个用户程序最多 200 个函数块
LOGO!0BA7:
以太网接口（取代以前系列的串行编程接口）
继电器输出，输出电流最大为 10A
集成了可参数设计背光的显示区(4x12字符)。
集成了操作员控制面板。
内置EEPROM存储器，用于控制程序和设定值
标准 SD 卡或 SIMATIC 存储卡可选
内置夏令时/冬令时自动调节的实时时钟。
备份集成的实时时钟 20 天。
8个数字量输入，4个数字量输出。
对于DC12/24V型号，4个输入作为模拟量输入(0-10V)；也可作为数字量输入。
4个输入可用来高速计数，最高5KHz(只针对于直流型)。
扩展模块连接接口，最多可编址 24 点数字量输入、16 点数字量输出、8 点模拟量输入和 2 点模拟量输出。
用于连接到 LOGO!TD 文字显示屏。
LOGO!8:
以太网端口
继电器输出，输出电流最大为 10A
背光可参数化集成显示区（6 x 16 个字符，3 种背光颜色）。
集成了操作员控制面板。
内置EEPROM存储器，用于控制程序和设定值
可选的标准微型 CF 卡
内置夏令时/冬令时自动调节的实时时钟。
备份集成的实时时钟 20 天。
8个数字量输入，4个数字量输出。
对于DC12/24V型号，4个输入作为模拟量输入(0-10V)；也可作为数字量输入。
4个输入可用来高速计数，最高5KHz(只针对于直流型)。
扩展模块连接接口，最多可编址 24 点数字量输入、20 点数字量输出、8 点模拟量输入和 8 点模拟量输出。
连接 LOGO!TDE 通过以太网。
Functions
集成有基本和特殊功能：
基本逻辑功能：
与，或，非，与非，或非，异或，上升沿/下降沿触发。
特殊功能：
接通延时，锁存接通延时，断开延时，脉冲延时，锁定延时，计数器（加计数/减计数），时间开关，间隔延时继电器，运行小时数计数器，触发器，异步脉冲发生器，年时间开关，舒适照明开关功能，随机发生器，楼梯照明开关功能（符合 DIN 18015-2），边沿触发间隔延时继电器，组合接通/断开延时，模拟值比较器，模拟触发器，模拟值变化触发器，模拟看门狗，模拟放大器，文本和变量显示，移位寄存器，软键功能，PI 控制器，斜坡功能，模拟复用器，PWM 功能，模拟算术运算功能，模拟算术运算功能错误检测功能。
可链接 200/400 个函数块。
27/64 个位存储器
（包括重启位存储器，用于控制集成显示屏和 LOGO! 的背光显示位存储器TD，用于在消息文本中的 2 个可参数化字符之间切换的位存储器）。
内置保持。
口令保护。
作为选项可提供的功能
作为选项可提供专有保护技术程序模块或 CF/微型 CF 卡。
LOGO! 0BA6 集成实时时钟的后备， 可选用使用寿命 2 年的电池模块和组合电池/程序模块
LOGO! 集成实时时钟的后备 0BA7 和 LOGO!8 个，20 天。
可选用的 LOGO!TD 文本显示屏与所有 ..0BA6 Pure 型的连接
用于 LOGO! 的其它功能0BA7
数据记录至内部存储器或 CF 卡（最多 2000 个记录）
用于 LOGO! 的宏（用户自定义功能）Soft Comfort V7
可以连接 400 个功能块
16 个模拟位存储器
64 个接线端子
4 个 8 位移位寄存器
新增特殊功能：
天文时钟，模拟滤波器，平均值计算，最小/最大值，定时器
诊断功能
用于 LOGO! 的其它功能8
数据记录至内部存储器或微型 CF 卡（最多 20000 个记录）
用于 LOGO! 的宏（用户自定义功能）极为简单
可以连接 400 个功能块
64 个模拟位存储器
64 个接线端子
4 个 8 位移位寄存器
扩展诊断功能
Technical Specifications
Order number | 6AG1052-1CC01-2BA6 | 6AG1052-1MD00-2BA6 | 6AG1052-1HB00-2BA6 | 6AG1052-1FB00-2BA6 | |
|---|---|---|---|---|---|
SIPLUS LOGO! 24C | SIPLUS LOGO! 12/24RC | SIPLUS LOGO! 24RC | SIPLUS LOGO! 230RC | ||
Product type designation |
|
|
|
| |
Installation type/mounting |
|
|
|
| |
Mounting | on 35 mm DIN rail, 4 spacing units wide | on 35 mm DIN rail, 4 spacing units wide | on 35 mm DIN rail, 4 spacing units wide | on 35 mm DIN rail, 4 spacing units wide | |
Supply voltage |
|
|
|
| |
Rated ＆#118alue (DC) | |||||
| Yes | ||||
| Yes | Yes | Yes | ||
| Yes | ||||
| Yes | ||||
permissible range, lower limit (DC) | 20.4 V; 22 V @ >55 °C | 10.8 V; 11 V @ >55 °C | 20.4 V; 22 V @ >55 °C | 100 V | |
permissible range, upper limit (DC) | 28.8 V; 27.5 V @ >55 °C | 28.8 V; 27.5 V @ >55 °C | 28.8 V; 27.5 V @ >55 °C | 253 V | |
Rated ＆#118alue (AC) | |||||
| Yes | ||||
| Yes | ||||
| Yes | ||||
Time of day |
|
|
|
| |
Time switching clocks |
|
|
|
| |
| 190 | 8 | |||
| 80 h | 80 h | 80 h | 80 h | |
Digital inputs |
|
|
|
| |
Number of digital inputs | 8; Of which 4 can be used in analog mode (0 to 10 V) | 8; Of which 4 can be used in analog mode (0 to 10 V) | 8 | 8 | |
Digital outputs |
|
|
|
| |
Number of digital outputs | 4; Transistor | 4; Relays | 4; Relays | 4; Relays | |
short-circuit protection | Yes; electrical (1 A) | No; external fusing necessary | No; external fusing necessary | No; external fusing necessary | |
Output current |
|
|
|
| |
| 0.3 A; 0.2 A @ > 55 °C; 0.3 A @ > 55 °C & < 15 s | ||||
Relay outputs |
|
|
|
| |
Switching capacity of contacts |
|
|
|
| |
| 3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s | 3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s | 3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s | ||
| 10 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s | 10 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s | 10 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s | ||
EMC |
|
|
|
| |
Emission of radio interference acc. to EN 55 011 |
|
|
|
| |
| Yes; Radio interference suppression according to EN55011, Limit ＆#118alue Class B | Yes | Yes | Yes | |
Degree and class of protection |
|
|
|
| |
Degree of protection acc. to EN 60529 | |||||
| Yes | Yes | Yes | Yes | |
Standards, approvals, certificates |
|
|
|
| |
CSA approval | No | No | No | No | |
UL approval | Yes; file＆#58 E120869 // Tmax = 55 °C | Yes; file＆#58 E120869 // Tmax = 55 °C | Yes; file＆#58 E120869 // Tmax = 55 °C | Yes; file＆#58 E120869 // Tmax = 55 °C | |
FM approval | No | No | No | No | |
developed in accordance with IEC 61131 | Yes | Yes | Yes | Yes | |
according to VDE 0631 | Yes | Yes | Yes | Yes | |
Marine approval |
|
|
|
| |
| No | No | No | No | |
Ambient conditions |
|
|
|
| |
Ambient temperature during operation |
|
|
|
| |
| -25 °C; = Tmin | -25 °C; = Tmin | -25 °C; = Tmin | -25 °C; = Tmin | |
| 70 °C; = Tmax; 55 °C @ UL/cUL use | 70 °C; = Tmax; 55 °C @ UL/cUL use | 70 °C; = Tmax; 55 °C @ UL/cUL use | 70 °C; = Tmax; 55 °C @ UL/cUL use | |
Extended ambient conditions |
|
|
|
| |
| Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) | |
Relative humidity |
|
|
|
| |
| 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) | 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) | 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) | 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) | |
Resistance |
|
|
|
| |
| Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation! | |
| Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
Dimensions |
|
|
|
| |
Width | 72 mm | 72 mm | 72 mm | 72 mm | |
Height | 90 mm | 90 mm | 90 mm | 90 mm | |
Depth | 55 mm | 55 mm | 55 mm | 55 mm | |
Order number | 6AG1052-1MD00-2BA7 | 6AG1052-1FB00-2BA7 | |
|---|---|---|---|
SIPLUS LOGO!12/24RCE | SIPLUS LOGO! 230RCE | ||
Product type designation |
|
| |
Installation type/mounting |
|
| |
Mounting | on 35mm DIN rail, 6 spacing units wide | on 35mm DIN rail, 6 spacing units wide | |
Supply voltage |
|
| |
Rated ＆#118alue (DC) | |||
| Yes | ||
| Yes | ||
| Yes | ||
| Yes | ||
permissible range, lower limit (DC) | 10.8 V | 100 V | |
permissible range, upper limit (DC) | 28.8 V | 253 V | |
Rated ＆#118alue (AC) | |||
| Yes | ||
| Yes | ||
Time of day |
|
| |
Time switching clocks |
|
| |
| 333 | 333 | |
| 480 h | 480 h | |
Digital inputs |
|
| |
Number of digital inputs | 8; of which 4 can be used in analog mode (0 to 10 V); max. load 9 A per relay @ all DI @ +55 °C to +60 °C; max. load 1 A per relay @ all DI @ > +60 °C; max. load 3 A per relay @ half the number of DI @ > +60 °C | 8; half the number of DI @ max. load 1A per relay @ > +60 °C | |
Digital outputs |
|
| |
Number of digital outputs | 4; Relays | 4; Relays | |
short-circuit protection | No; external fusing necessary | No; external fusing necessary | |
Relay outputs |
|
| |
Switching capacity of contacts |
|
| |
| 3 A | 3 A | |
| 10 A; max. last 9 A per relay @ all DI @ +55 °C to +60 °C; max. load 1 A per relay @ all DI @ > +60 °C; max. load 3 A per relay @ half the number of DI @ > +60 °C | 10 A; max. load 1A per relay @ half the number of DI @ > +60 °C | |
EMC |
|
| |
Emission of radio interference acc. to EN 55 011 |
|
| |
| Yes; Radio interference suppression according to EN55011, Limit ＆#118alue Class B | Yes; Radio interference suppression according to EN55011, Limit ＆#118alue Class B | |
Degree and class of protection |
|
| |
Degree of protection acc. to EN 60529 | |||
| Yes | Yes | |
Standards, approvals, certificates |
|
| |
CSA approval | Yes | ||
UL approval | Yes | Yes | |
FM approval | Yes | ||
developed in accordance with IEC 61131 | Yes | Yes | |
according to VDE 0631 | Yes | Yes | |
Marine approval |
|
| |
| Yes | ||
Ambient conditions |
|
| |
Ambient temperature during operation |
|
| |
| -25 °C; = Tmin | -25 °C; = Tmin | |
| 70 °C; = Tmax | 70 °C; = Tmax | |
Extended ambient conditions |
|
| |
| Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) | |
Relative humidity |
|
| |
| 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) | 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) | |
Resistance |
|
| |
| Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
Dimensions |
|
| |
Width | 107 mm | 107 mm | |
Height | 90 mm | 90 mm | |
Depth | 55 mm | 55 mm | |